KONFIGURASI VLAN

KONFIGURASI VLAN

• Gambar topologinya terlebih dahulu

• Kita beri nama pada vlannya
  

Switch>en

Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name ihdi
Switch(config-vlan)#ex
Switch(config)#vlan 20
Switch(config-vlan)#name haqqi
Switch(config-vlan)#ex
Switch(config)#

• Lalu kelompokan PC 0 dan PC 1 menjadi satu vlan,yaitu vlan 10
  

Switch(config)#int range fa0/1-2

Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 10
Switch(config-if-range)#ex

• Selanjutnya hubungkan switch ke router

Switch(config)#int fa0/5

Switch(config)#swicthport mode trunk

• Selanjutnya enable Router

Router(config)#int gi0/0

Router(config-if)#no sh

• Kelompokkan juga PC 2 dan PC 3 kedalam vlan 20
  

Switch(config)#int range fa0/3-4

Switch(config-if-range)#switchport mode access
Switch(config-if-range)#switchport access vlan 20
Switch(config-if-range)#ex

• Selanjutnya beri ip pada PC 0-PC3

PC 0:

IP Add            :192.168.10.3

Subnet Mask  : 255.255.255.0

Gateway         :192.468.10.1

PC 1:

IP Add            :192.168.10.4

Subnet Mask  : 255.255.255.0

Gateway         :192.468.10.1

PC 2:

IP Add            :192.168.20.3

Subnet Mask  : 255.255.255.0

Gateway         :192.468.20.1

PC 3:

IP Add            :192.168.20.4

Subnet Mask  : 255.255.255.0

Gateway         :192.468.20.1

• Selanjutnya konekan vlan 10 & vlan 20

Router(config-subif)#ex

Router(config)#int gi0/0.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip add 192.168.10.1 255.255.255.0
Router(config-subif)#ex
Router(config)#int gi0/0.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip add 192.168.20.1 255.255.255.0
Router(config-subif)#ex

• Terakhir kirim pesan
  

Read More

KONFIGURASI DHCP

KONFIGURASI DHCP

• Gambar terlebih dahulu konfigurasinya

• Enable Router 0
  

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int gi0/0
Router(config-if)#ip add 192.168.10.254 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up


Router(config-if)#

• Selanjutnya buat DHCP
  

Router(config-if)#ex

Router(config)#ip dhcp pool ihdi
Router(dhcp-config)#network 192.168.10.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.10.254
Router(dhcp-config)#dns-server 8.8.8.8
Router(dhcp-config)#ex

• Terakhir ganti configuration PC dari static ke dhcp
  
• Lalu coba kita kirim pesan
  

Read More

KONFIGURASI OSPF

KONFIGURASI OSPF

• Gambar topologinya terlebih dahulu
  
• Tambahkan ip di setiap PC

PC 0 :

IP Address                  :192.168.11.1

Subnet Mask               :255.255.255.0

Gateway                      : 192.168.11.2

PC 1 :

IP Address                  :192.168.22.1

Subnet Mask               :255.255.255.0

Gateway                      : 192.168.22.2

• Tambahkan IP di setiap Router

Router 0

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int gi0/0

Router(config-if)#ip add 192.168.11.2 255.255.255.0

Router(config-if)#no sh

Router(config-if)#int gi0/1

Router(config-if)#ip add 172.16.10.1 255.255.255.252

Router(config-if)#no sh

Router 1

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int gi0/0

Router(config-if)#ip add 192.168.22.2 255.255.255.0

Router(config-if)#no sh

Router(config-if)#int gi0/1

Router(config-if)#ip add 172.16.10.2 255.255.255.252

Router(config-if)#no sh

• Konfigurasi OSPF di router

Router 0

Router(config)#router ospf 1

Router(config-router)#network 192.168.11.0 0.0.0.255 area 0

Router(config-router)#network 172.16.10.0 0.0.0.255 area 0

Router(config-router)#end

Router 1

Router(config)#router ospf 1

Router(config-router)#network 192.168.22.0 0.0.0.255 area 0

Router(config-router)#network 172.16.10.0 0.0.0.3 area 0

Router(config-router)#end

• Terakhir ping dari PC0 kePC1 atau sebaliknya

Read More