KONFIGURASI OSPF

KONFIGURASI OSPF

• Gambar topologinya terlebih dahulu
  
• Tambahkan ip di setiap PC

PC 0 :

IP Address                  :192.168.11.1

Subnet Mask               :255.255.255.0

Gateway                      : 192.168.11.2

PC 1 :

IP Address                  :192.168.22.1

Subnet Mask               :255.255.255.0

Gateway                      : 192.168.22.2

• Tambahkan IP di setiap Router

Router 0

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int gi0/0

Router(config-if)#ip add 192.168.11.2 255.255.255.0

Router(config-if)#no sh

Router(config-if)#int gi0/1

Router(config-if)#ip add 172.16.10.1 255.255.255.252

Router(config-if)#no sh

Router 1

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int gi0/0

Router(config-if)#ip add 192.168.22.2 255.255.255.0

Router(config-if)#no sh

Router(config-if)#int gi0/1

Router(config-if)#ip add 172.16.10.2 255.255.255.252

Router(config-if)#no sh

• Konfigurasi OSPF di router

Router 0

Router(config)#router ospf 1

Router(config-router)#network 192.168.11.0 0.0.0.255 area 0

Router(config-router)#network 172.16.10.0 0.0.0.255 area 0

Router(config-router)#end

Router 1

Router(config)#router ospf 1

Router(config-router)#network 192.168.22.0 0.0.0.255 area 0

Router(config-router)#network 172.16.10.0 0.0.0.3 area 0

Router(config-router)#end

• Terakhir ping dari PC0 kePC1 atau sebaliknya